Fundamentals of Drum Tuning and Recording
Course

Fundamentals of Drum Tuning and Recording

Creative Live
Updated Mar 15, 2019

Drums are one of the hardest instruments to record, because in reality, a drum kit can be upwards of 20 or 30 instruments being played by a performer at one consistent time. Each drum head plays a huge role in determining the overall tone. The range of frequencies is broader than any other recorded instrument, with sub-kicks extending down below 60 Hz and hihats and cymbals with presence and ring above 16kHz. The dynamic range can include subtle ghost hits and flutters to pounding snares that fill a room, and yet somehow all of this is supposed to fit inside a mix without getting lost in a sea of guitars.

Kris Crummett has over a decade and a half of experience recording bands like Sleeping with Sirens, Issues, Alesana, Further Seems Forever and Emarosa. Kris will walk you through every step of the process to capturing killer drum sounds.

Which Drums to Use?

  • The size and type of the kick drum is a good place to start, and will largely dictate what kind of tone you end up with when you get the final mix. Do you want a modern sounding kit with a big low end and a bright punch or a more vintage tone with a rounder, softer low end punch?
  • Snare sounds can often define the tone of an entire record with a range of sizes, head choices and tuning options. How much ring is left in the resonant head can be deceiving when listening to an drum kit on its own, but can often be lost when blended in with the rest of the band. From maple and birch full bodied and nuanced tones to aluminum or even brass bodies, the snare drum can have one of the biggest impacts on your final track.
  • Drum heads can also have a huge impact on the transients that you capture when recording. Coated heads can offer a punchier, thicker sound while clear heads are a bit brighter. Tuning the top head and the bottom head to resonant together is an essential art that takes practice and expertise.

Which mics to Use?

  • There’s no right or wrong way to mic a drum kit, from the famous ‘When the Levee Breaks” 2 microphone room tone to modern metal drum production with 30+ mics in place.
  • Deciding when to use a condenser and when to use a dynamic mic is dependent upon the style, the drummer’s playing style and even the room in which you’re tracking. What sort of room mic techniques can give you that big open kit sound? What about a tight, small room trap kit sound?

Kris is prepared to walk you through all of these choices, with examples from his storied career and tips and tricks that only years in the studio can earn you. With legendary guest drummer KJ Sawka, you’ll have an experienced team to guide you through how to overcome the biggest challenge for a home studio engineer, the drum kit.